|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HMC550 / 550E v00.0306 GaAs MMIC SPST FAILSAFE SWITCH, DC - 6 GHz Typical Applications The HMC550 / HMC550E is ideal for: * RFID & Electronic Toll Collection (ETC) * Tags, Handsets & Portables * ISM, WLAN, WiMAX & WiBro Features Failsafe Operation - "On" When Unpowered Positive Control: 0/+2.2V to 0/+5V Very Low On State Current: 200 nA Low Insertion Loss: 0.7 dB High IP3: +52 dBm Compact SOT26 SMT Package 8 SWITCHES - SMT * Automotive Telematics * Test Equipment Functional Diagram General Description The HMC550 and HMC550E are low-cost SPST Failsafe switches in 6-lead SOT26 plastic packages for use in switching applications which require low insertion loss and very low current consumption. With 0.7 dB typical loss, these devices can control signals from DC to 6.0 GHz and are especially suited for IF and RF applications including RFID, ISM, automotive and battery powered tags and portables. RF1 and RF2 are reflective opens when "Off". The switch requires a minimal amount of DC current in the "On" state, and offers compatibility with CMOS and some TTL logic families. The failsafe topology results in the switch being normally "On", i.e. low insertion loss from RF1 to RF2, when no DC bias is applied. Electrical Specifications TA = +25 C, Vdd = +3.3 Vdc, Vctl = 0/+3.3 Vdc (Unless Otherwise Stated), 50 Ohm System Parameter Insertion Loss Isolation Return Loss Input Power for 0.1 dB Compression Input Third Order Intercept (Two-tone Input Power = +17 dBm Each Tone) Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) Vctl = 0/+3.3V Vctl = 0/+3.3V Frequency DC - 6.0 GHz DC - 2.0 GHz DC - 6.0 GHz DC - 6.0 GHz 0.5 - 6.0 GHz 0.5 - 6.0 GHz DC - 6.0 GHz 40 50 ns ns 23 15 8 Min. Typ. 0.7 25 12 20 27 52 Max. 0.9 Units dB dB dB dB dBm dBm TA = +25 C, Vctl & Vdd Unpowered Insertion Loss Return Loss Input Power for 0.1 dB Compression Input Third Order Intercept (Two-tone Input Power = +17 dBm Each Tone) DC - 6.0 GHz DC - 6.0 GHz 0.5 - 6.0 GHz 0.5 - 0.6 GHz 23 0.7 20 27 52 0.9 dB dB dBm dBm 8 - 306 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC550 / 550E v00.0306 GaAs MMIC SPST FAILSAFE SWITCH, DC - 6 GHz Insertion Loss 0 Return Loss 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 +25C +85C -40C INSERTION LOSS (dB) -0.5 -1 +25C +85C -40C -1.5 8 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) -2 -2.5 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) Isolation 0 -10 Input IP3 vs. Temperature 60 55 INPUT IP3 (dBm) 50 45 40 35 30 +25C +85C -40C ISOLATION (dB) -20 -30 -40 -50 -60 -70 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) +25C +85C -40C 0 1 2 3 4 5 6 FREQUENCY (GHz) Input P0.1dB vs. Temperature 35 30 INPUT P0.1dB (dBm) 25 20 15 10 5 0 0 1 2 3 4 5 6 FREQUENCY (GHz) +25C +85C -40C For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 307 SWITCHES - SMT HMC550 / 550E v00.0306 GaAs MMIC SPST FAILSAFE SWITCH, DC - 6 GHz Insertion Loss, Power Off 0 Return Loss, Power Off 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 INSERTION LOSS (dB) -0.5 -1 8 SWITCHES - SMT -1.5 -2 -2.5 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) Input P0.1dB, Power Off 35 30 INPUT P0.1dB (dBm) Input IP3, Power Off 60 55 INPUT IP3 (dBm) 50 45 40 35 30 25 20 15 10 5 0 0 1 2 3 4 5 6 FREQUENCY (GHz) 0 1 2 3 4 5 6 FREQUENCY (GHz) Bias Voltage & Current Vdd (Vdc) 3.3 Low State 0.3 A High State 0.5 A Absolute Maximum Ratings RF Input Power (Vctl = 0/+3.3V) Supply Voltage (Vdd) Control Voltage Range (Vctl) +34 dBm +12 Vdc -0.2 to +VDD Vdc +35 dBm 150 C 433 mW 150 C/W -65 to +150 C -40 to +85 C Control Voltages State Low High Bias Condition 0 to 0.2 Vdc @ 0.3 A Typical +2.2 Vdc @ 0.2 A Typical to +5 Vdc @ 0.5 A Typical Hot Switch Power Level (Vctl = 0/+3.3V) Channel Temperature Continuous Pdiss (T= 85 C) (derate 6.67 mW/ C above 85C) Thermal Resistance Storage Temperature Operating Temperature RF1 to RF2 Path Off On Truth Table Control Input (Vctl) Low High DC blocks are required at ports RF1 and RF2. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 8 - 308 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC550 / 550E v00.0306 GaAs MMIC SPST FAILSAFE SWITCH, DC - 6 GHz Outline Drawing 8 SWITCHES - SMT NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number HMC550 HMC550E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking H550 550E [2] [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 309 HMC550 / 550E v00.0306 GaAs MMIC SPST FAILSAFE SWITCH, DC - 6 GHz Typical Application Circuit 8 SWITCHES - SMT Note: 1. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation. Pin Descriptions Pin Number 1, 3 Function RF1, RF2 Description These pins are DC coupled and matched to 50 Ohms. Blocking capacitors are required. Interface Schematic 2, 5 GND These pins must be connected to RF ground. 4 Vctl See truth and control voltage tables. 6 Vdd Supply Voltage 8 - 310 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC550 / 550E v00.0306 GaAs MMIC SPST FAILSAFE SWITCH, DC - 6 GHz Evaluation PCB 8 SWITCHES - SMT List of Materials for Evaluation PCB 109266 [1] Item J1 - J2 J3 - J5 C1 C2 - C3 R1, R2 U1 PCB [2] Description PCB Mount SMA RF Connector DC Pin 1,000 pF Capacitor, 0402 Pkg. 100 pF capacitor, 0402 Pkg. 100 Ohm Resistor, 0402 Pkg. HMC550 / HMC550E SPST Switch 108436 Evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 311 |
Price & Availability of HMC550 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |